Psa Xs Evolution Drivers 2021 - Actia

Go to > Advanced options > Startup Settings > Restart .

and accept any Windows Security prompts to "Install this driver software anyway". Hardware Connection Connect the USB cable to the PC the driver installation is complete. Windows should automatically detect the hardware. Check Device Manager

The compatibility of your driver depends entirely on the version of Diagbox or Lexia you intend to run.

Use this utility to verify the connection and check the internal firmware version (e.g., 4.3.0 or 4.3.5). actia psa xs evolution drivers

Would you like step-by-step installation instructions for Windows 10/11, or help with a driver error code (e.g., Code 10 or Code 43)?

Upon reboot, press or F7 to select "Disable driver signature enforcement." Step 2: Plug in the Interface

Go to Device Manager, right-click your USB Root Hubs, select Properties , go to the Power Management tab, and uncheck "Allow the computer to turn off this device to save power" . Best Practices for a Stable Diagnostic Setup Go to > Advanced options > Startup Settings > Restart

Ensure the cable is plugged in properly. Sometimes, the XS Evolution requires a specific USB-to-LAN adapter setup, especially for older PASSTHRU+ devices.

, then connect the USB to the PC. Wait 5 seconds before launching the software. Firmware Mismatch

Never plug the ACTIA interface into your PC before installing your diagnostic software. Run the installer for (or standalone Lexia/PP2000). Windows should automatically detect the hardware

To help narrow down any remaining setup issues, let me know:

After successful installation, the interface should appear in Device Manager as “USB Com Board Evolution Driver (UMDF)” or similarly named device.