Eppendorf 5402 Manual Updated
Turn off the main power switch and unplug the electrical cord.
Mechanical buttons to initiate or manually terminate a centrifugation cycle.
For the most current technical updates, safety declarations (such as EU Regulation 2017/746 ), and discontinued part notices, visit the Eppendorf Download Center solution or a list of compatible rotors for your 5402? Centrifuge 5420 - Eppendorf
: Relates to rotor recognition. Ensure a compatible rotor is installed and try power-cycling the device. eppendorf 5402 manual updated
If you need the original for replacement pieces
The unit will automatically shut down if an imbalance is detected. Open the lid, check for cracked tubes or fluid leaks, and re-balance the rotor symmetrically.
This section is critical in the deep paper analysis, as improper maintenance is the primary cause of failure in these units. Turn off the main power switch and unplug
Capable of dropping the rotor chamber from 20∘C20 raised to the composed with power C 4∘C4 raised to the composed with power C in approximately 10 minutes.
Always ensure the rotor is properly tightened onto the drive shaft.
Stop the run immediately. Open the lid and balance the tubes using a digital scale. Lid latch mechanism error or sensor fault. Centrifuge 5420 - Eppendorf : Relates to rotor recognition
Visit the official Eppendorf website and navigate to their "Support" or "Literature" sections. Search for legacy documentation or archived operating manuals.
Thus, treating the “updated manual” as the sole source of truth is not just best practice—it is a liability shield.
Operating laboratory equipment safely requires strict adherence to technical limitations. Below are the core technical specifications for the Eppendorf 5402. 14,000 RPM (Rotations Per Minute) Maximum RCF: 16,000 × g (Relative Centrifugal Force) Temperature Range: -9°C to +40°C
The phrase "updated manual" can be interpreted in several ways. It’s important to understand what this typically means for a legacy model like the 5402: