Everec 340 User Manual [hot] Page

Professional hardwire installation is mandatory to enable advanced fleet tracking, automatic ignition triggers, and optional parking modes. Step 1: Mounting the Camera

If you have lost the printed manual or require the most up‑to‑date version, you can:

: Heavy-duty adhesive cradle for windshield attachment.

: Use an adhesive mount or anti-slip mat to attach the camera bracket to your windshield. Press firmly for 30 seconds to ensure a strong bond. everec 340 user manual

4K 30fps; 1080p/720p/960x540/848x480/640x480/640x360 60fps. Field of View: 120° diagonal. Zoom: Up to 4x (digital zoom). Protocol: USB 3.0 Type-C.

Replace the internal CR2032 button cell battery on the mainboard. Preventive Maintenance Tips

to find authorized installers who can provide the latest firmware and PDF guides. DTec London Press firmly for 30 seconds to ensure a strong bond

Most models feature a "panic button" or remote trigger that allows drivers to manually upload specific video segments. Status Indicators:

| Problem | Likely Cause | Solution | |---------|--------------|----------| | | Dead backup battery / faulty cable | Connect to charger; replace cable; try USB port on PC | | “Card error” message | Card not formatted or slow speed | Format card in device; use Class 10 card; replace card | | Recording stops after 5 seconds | Loop recording off or card full | Turn on loop recording; format card | | Blurry or foggy video | Dirty lens / condensation | Clean with microfiber cloth; allow device to acclimate | | Date resets every time | Internal backup battery dead | Replace internal battery (requires soldering) or set date via GPS | | File not playing on PC | Corrupted file or wrong codec | Install VLC media player; run chkdsk on SD card | | G-Sensor too sensitive | Setting too high | Change to Medium or Low in menu | | Blue or pink tint | White balance issue | Turn device off/on; reset to factory defaults |

To claim warranty service:

The status LEDs on the cabin-facing side of the camera give you immediate visual feedback on system health.

Place the CAM340+ on top of your TV, monitor, or laptop using the built-in mount clip. Tripod Setup: Screw a tripod into the 14one-fourth " screw hole on the bottom of the unit. Connecting to a PC/Laptop