Located on top of the telescope for rough targeting.
Aim the telescope at a highly visible, sharp target located roughly 100 meters away. Take a measurement in Face I (Telescope normal).
Re-align crosshairs exactly onto target; clean target surface or lens. Battery is dead or poorly seated.
Configures system parameters, EDM settings, communication settings, and calibration routines. 5. Electronic Distance Measurement (EDM) Settings leica tcr805 total station user manual
Up to 200 meters (depending on target reflectivity and ambient light) using Leica’s PinPoint laser technology.
Tangent screws used for fine adjustments when sighting.
Whether you have lost your original hard copy or need a quick digital reference, this comprehensive guide serves as an expanded user manual, troubleshooting companion, and operational overview for the Leica TCR805 total station. 1. Technical Specifications Overview Located on top of the telescope for rough targeting
Can be programmed for quick access to frequent functions like changing from Prism to Reflectorless mode, or toggling the laser pointer. MENU Key: Opens the main system settings including:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Extend the tripod legs to a comfortable working height and tighten the leg clamps. Position the tripod roughly over the ground survey point. in the TCR805 menu
Launch your data transfer software on the computer (such as Leica Geo Office , Leica Infinity , or a compatible open-source data collector application).
absolute constant. However, in the TCR805 menu, this is represented as a Leica constant of 0 .
The TCR805 is designed for versatility in engineering and tacheometry surveys.