Maintenance Box Resetter For Epson L6170 =link= -

Press the resetter firmly against the chip for 4 to 7 seconds.

Always power down the machine before removing components.

However, replacing the maintenance box can be expensive, and it's not always necessary. A maintenance box resetter allows you to reset the counter and reuse the box, saving you money and reducing waste.

If you must reset yourself (software method — Windows example) maintenance box resetter for epson l6170

The resetter light will flash red for a few seconds, then turn solid green. Green means success.

There are two primary types of resetters for the Epson L6170:

The light will turn solid , indicating a successful electronic reset. Pull the resetter away. Step 5: Reassembly and Testing Press the resetter firmly against the chip for

An LED light on the resetter will immediately light up. It usually flashes for a few seconds as it communicates, and then turns a solid Green .

Hardware resetters

It will flash for a few seconds to indicate contact has been made. A maintenance box resetter allows you to reset

Usually, no. However, some newer firmware versions are designed to block third‑party chips. If you have recently updated your firmware, research whether a compatible resetter is still available.

The Epson L6170 is a high-performance EcoTank printer designed for efficiency, but it contains a built-in safeguard that can eventually halt productivity: the maintenance box. This component, which collects excess ink during print head cleaning and startup cycles, is equipped with a smart chip that tracks its saturation level. Once the chip registers that the box is full, the printer locks itself to prevent ink overflow, displaying a "Service Required" error. While the official solution is to purchase a new maintenance box (model T04D1), many users turn to a maintenance box resetter as a cost-effective and sustainable alternative.