Nokia G240ge Manual | Working

port on the device and the fiber optic cable itself. Connect the cable to the optical port. Router Connection

Type the default gateway IP address into the address bar: (or 192.168.1.1 , depending on firmware regional variations) and press Enter.

Depress the latching toggle switch into the "ON" state. LED Indicator Decoding Matrix

If you prefer using a third-party mesh system or high-end router to handle all routing tasks, you can configure the Nokia G240GE into Bridge Mode under the WAN configuration tab. This disables the ONT's built-in routing and passes the external IP straight to your personal router.

If you require the official manufacturer’s PDF, here are the proven methods to download it:

Assuming your fiber optic cable has been professionally terminated at your wall, here is how to physically set up the G240GE.

Click or Apply . Repeat these steps for the other frequency band if they are not synchronized. 6. Advanced Technical Configurations

External 12V DC, 2.0A Barrel Adapter (consumption: ~5.4W standby, 7.9W typical)