A: The timer can turn a device on or off for a minimum interval of 1 second and can be programmed for up to 168 hours.
Before you begin the installation or programming, always adhere to these important safety rules:
The table below summarizes the key technical specifications for the Sinotimer TM‑630S series.
: Enters program mode and cycles through the 16 ON/OFF settings. D+ : Adjusts the day of the week. H+ : Adjusts the hour. M+ : Adjusts the minute. sinotimer tm-630s manual
Press repeatedly until the correct day of the week appears at the top of the screen. Press H+ until the correct hour is reached. Press M+ until the current minute is set. Release the Clock button to save the time. Programming the Schedule The device allows up to 17 unique On/Off schedules.
Check if the unit is in AUTO mode. Press C/R until "AUTO" appears on the screen.
This is a volt-free (dry) contact or a powered output depending on the variant. A: The timer can turn a device on
The Sinotimer TM-630S is a high-power, weekly programmable digital timer switch. It automates electrical equipment to save energy and reduce utility costs. This comprehensive manual covers installation, wiring, programming, and troubleshooting. Technical Specifications
Programming the Sinotimer TM-630S is straightforward. Here's a step-by-step guide:
Common features across all variants include a 30‑amp relay output, a 7‑day programmable schedule with up to 28 ON/OFF events, and a built‑in backup battery that retains settings for up to 60 days during a power failure. D+ : Adjusts the day of the week
A: Yes, you can use the week programming function to schedule events for specific individual days or any combination of days, allowing for a different schedule on weekends.
The internal battery may be depleted if the device was stored unpowered for months. Connect the main power supply to terminals 1 and 2 for at least 10 minutes to initialize the display. Device does not turn on at the scheduled time
A: The timer's switching contacts are rated for up to 30 Amps at 250V AC, which is equivalent to 5000 Watts. It is strongly recommended to use an external contactor for loads near this limit or for highly inductive loads like motors.