Vu Solo2 Backup Image ★

Turn off the Vu+ Solo2 using the deep power switch located at the rear of the box.

A full backup creates a complete .zip file of your current OS (OpenPLi, VTi, Black Hole, etc.), including all installed plugins and settings. This is done via USB. Prerequisites A USB stick (formatted to FAT32).

When the backup completes, look at your storage device via an FTP client (like FileZilla) or on your PC. You will find a specific directory structure. For the Vu+ Solo2, it must look exactly like this: vu solo2 backup image

Before you rush to download the latest backup image, understand the landscape.

The VFD display will change to and then "Flashing..." . Do not turn off the power or remove the USB drive during this time. Once the process is finished, the box will automatically reboot into your restored, fully configured environment. Turn off the Vu+ Solo2 using the deep

A corrupted file download or a failing sectors on your flash drive.

Alternatively, you can use an internal or external Hard Disk Drive (HDD) connected to your VU+ Solo2. Prerequisites A USB stick (formatted to FAT32)

Ensure your receiver remains plugged into a reliable power source during the process. How to Create a Full Backup Image on VU+ Solo2

The process varies slightly depending on which firmware (image) you are currently running. Insert your FAT32 USB stick into the receiver. Press the Menu button and navigate to the Backup Menu . Select Full Backup . Press the Green Button to initiate a new backup. Confirm with Yes and wait for the process to complete. OpenViX Insert your USB stick. Press Menu > Setup > VIX . Select Image Manager . Press the Green Button to start the backup. Confirm by selecting Yes . VTi Image Insert your USB stick. Press the Green Button on your remote. Select Software Manager > Complete Backup . Choose Backup Image to start the process. How to Restore or Flash Your Backup