Manual — Xycd60

Disconnects loads when a 24V battery bank becomes too low.

A: Yes, it is highly suitable. Set dn (lower limit) to roughly 10.5V-11V and UP (upper limit) to 14.4V-14.6V for typical 12V Li-ion protection.

Connect to your power source (Charger) or Battery (if in discharge mode). xycd60 manual

Up to 20A or 30A (Check variant details; standard models use 20A relays at 14VDC/125VDC, while the XY-CD63 upgrade handles up to 30A). Idle Operating Current: ~30mA Operating Temperature: -40°C to 85°C

The module supports two primary work modes, which you can toggle by long-pressing the UP button for five seconds: Charging Control (P-1 / IN): Activation: Disconnects loads when a 24V battery bank becomes too low

Avoid running continuous loads right at the 10A limit to prevent the relay from overheating.

For the most detailed, up‑to‑date information, refer to the manufacturer’s documentation. Connect to your power source (Charger) or Battery

This article provides a comprehensive overview and manual for the . This device is a versatile DC voltage monitoring module designed to protect batteries (lead-acid, lithium-ion, etc.) from over-charging and over-discharging.